perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Great job supplying the manual.
Many of these products weerepretty obscure, so it was great that you had
the manual for it!
Text excerpt from page 8 (click to view)
Operating Sequence
Before the first wash, we recommend that you pour 2 litres of water into the main wash compartment of the detergent drawer in order to activate the ECO valve. Then run a cotton cycle at 60°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the dispenser drawer and start the machine. WASHING 6 KG OF WHITE COTTON AT 95°C Suppose you have 6 kg of heavy soiled laundry to wash. It is white cotton and is suitable for high temperature washing.
3. Select the required programme
Turn the programme selector dial to the programme 1. The light �start pause� starts to flash. The pilot lights corresponding to the various phases making up the programme come on.
PROGRAMME
15 14 13 12 11 10 9 8
1 2 3 4 5 6 7
1. Load the laundry
Open the door by pulling the door handle outwards. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door.
4. Select �8 H� or �4 H� option
Press the option button repeatedly, to select the desired option. The relevant light illuminates.
8H
4H
P0004
2. Measure out the detergent and the fabric softener
Pull out the dispenser drawer until it stops. Measure out the amount of detergent required, pour it into the main wash compartment and into the compartment marked if you have selected the �prewash� option. If required, pour fabric softener into the compartment marked (the amount used must not exceed the �MAX� mark in the drawer). Close the drawer gently.
5. Select the required option
Select �rinse hold� or �spin reduction� option if required, the corresponding light illuminates.
